Product Description
Torklift C1213-30 SuperHitch MAGNUM 30K - Torklift Tow Bar 13600KG to suit Various Chevrolet and GMC 2500 and 3500
MEETS AUSTRALIAN DESIGN RULES
Suits 2023 -2025 GMC 2500 and 3500
SuperHitch Magnum 30K
The SuperHitch Magnum 30K is rated at 1360kg tongue weight, 13600kg pull with weight distribution and 9700kg pull and 1130kg tongue weight carrying.
Most applications don't require drilling and are compatible with industry standard ball mounts.
It uses our patented dual receiver design (2.5" upper and 2" lower) high penetration dual shield welding and includes hardened reinforced hitch pin locations. The SuperHitch Magnum 30K has a Legendary Lifetime Warranty and is proudly made in the USA.
SuperHitch® Magnum 30k Features
-
SuperHitch® 30K frame mounted receiver rated up to 30,000 lbs pull and 3,000 lbs tongue weight with weight distribution (20,000 lbs pull and 2,500 lbs tongue weight carrying) in either the upper or lower receivers when used without a SuperTruss extension
-
SuperTruss extensions available in 8 lengths from 21" to 60" (sold separately)
-
Upper receiver is 2.5" (accepts 2.5" ball mounts; use a 2.5" to 2" reducer sleeve if using a 2" shank in the upper); lower receiver is 2" (accepts 2" ball mounts and SuperTruss extensions)
-
Eliminates the need for two ball mounts by allowing ball height variance using either the upper or lower SuperHitch® receiver
-
Specific Torklift tie down fits are available for the SuperHitch® Outlaw Series
-
Legendary Lifetime Warranty
-
Proudly made in the USA
Receiver & Ball Mount Compatibility
-
Upper receiver: 2.5" opening. Use 2.5" ball mounts/drawbars; if using a 2" accessory in the upper receiver, a 2.5" to 2" reducer sleeve is required (reducer sleeve included in kit).
-
Lower receiver: 2" opening. Accepts 2" ball mounts and the SuperTruss extension.
-
SuperTruss extensions easily installs into dual receiver and accept 2" accessories.
Installation At A Glance
-
No drilling required on 2020-2026 Chevrolet/GMC 2500/3500 6.5' or 8′ bed (SRW or DRW) applications.
-
Estimated install time: 1.5–2.5 hours with standard shop tools.
-
Tools commonly used: torque wrench, sockets, box wrenches, safety glasses.
-
Torque: Tighten all fasteners to the values specified in the installation instructions for C1213-30; re-torque after initial use.
What’s Included
-
1 x SuperHitch® Magnum 30K receiver assembly (C1213-30)
-
1 x Reducer Sleeve (M9006)
-
1 x Complete bolt and accessory hardware kit (included)
-
2 x Hitch pin/clips for hitch pin locations with reinforced pin holes
-
1 x Installation instruction set for C1213-30
Accessories required to achieve listed ratings:
-
Weight distribution system required to reach 30,000 lb pull / 3,000 lb tongue (no extension) and 12,000 lb pull / 1,200 lb tongue when using a 48" SuperTruss
-
SuperTruss extension (sold separately) required when towing with a truck camper or bed overhang
Safety & Conditions
-
Definitions:
-
Pull (Gross Trailer Weight, GTW): The total loaded trailer weight being towed.
-
Tongue Weight (TW): The vertical load on the hitch from the trailer coupler.
-
Rule: Never exceed your vehicle manufacturer’s rated capacities including GVWR, GAWR, or GCWR.
-
Weight Distribution (WD) is required to reach 30,000 lb pull / 3,000 lb tongue with no extension, and to reach the 12,000 lb pull / 1,200 lb tongue maximum when using longer SuperTruss extensions.
-
Example: If your trailer weighs 25,000 lb with a 2,500 lb tongue and your truck’s GCWR allows it, you may tow at this weight only when using a properly sized weight distribution system and no extension. If you add a 48" SuperTruss, your maximum is limited to 12,000 lb pull / 1,200 lb tongue with WD (6,000/600 carrying), regardless of trailer capability.
